Hardware Specifications

Vendor/Brand	Huawei
Model	HN8010Ts
ODM
Chipset	HiSilicon SD5117
Flash	128MB
RAM	32MB
System	Dopra Linux
10GBaseT	Yes
Optics	SC/APC
IP address	192.168.100.1
Web Gui	✅ user: `telecomadmin`, password: `admintelecom`
SSH
Telnet	After Enabling (via XML file) user: `root`, password: `adminHW`
Serial
Form Factor	ONT

Software Version

V5R02C0C10S165

List of partitions

0x000000000000-0x000000100000 : “bootcode” (1MiB)
0x000000100000-0x000008000000 : “ubilayer_v5” (127MiB)

Enabling telnet

We need access to a specific shell and in order to get it enabling telnet is required. On the ONT, the telnet server accepts connections but doesn’t read any input, nor does it send anything.

To enable telnet the configuration backup/restore web UI page will be used. The configuration can be downloaded as an XML, which contains a lot more options than the web interface and a couple of them can be modified to enable telnet access: under the X_HW_CLITelnetAccess node, set the Access attribute to 1 and, in AclServices, TELNETLanEnable should also be set to 1. Both might have to be set but your mileage may vary.

It is possible that this won’t work/has been fixed in more recent versions.

Now that this is done, the modified configuration file can be uploaded via the web interface, the ONT will restart and telnet should be accessible on port 23.

Warning All results need to be converted from HEX to ASCII. You can use our Converter, taking care to add 0x in front and remove the spaces every 8 hex digits.

GPON ONU status

Get information of the OLT vendor

WAP>omcicmd mib show meid 131 instid 0

  -------------------------------------------------------
  Me(OLT-G), instance(0x0), instance size is 54
  -------------------------------------------------------
  Att1, AttSize = 0x4, AttContent: 48575443
  Att2, AttSize = 0x14, AttContent: 00000000 00000000 00000000 00000000 00000000
  Att3, AttSize = 0xe, AttContent: 31300000 00000000 00000000 0000
  Att4, AttSize = 0xe, AttContent: 00000000 00000000 00000000 0000
  -------------------------------------------------------

success!

0x48575443 → HWTC (Huawei)

GPON/OMCI settings

Getting OMCI software version (ME 7)

WAP>omcicmd mib show meid 7 instid 0

  -------------------------------------------------------
  Me(Software Image), instance(0x0), instance size is 19
  -------------------------------------------------------
  Att1, AttSize = 0xe, AttContent: 56355230 32304331 30533131 3500
  Att2, AttSize = 0x1, AttContent: 00
  Att3, AttSize = 0x1, AttContent: 00
  Att4, AttSize = 0x1, AttContent: 01
  -------------------------------------------------------

success!
WAP>omcicmd mib show meid 7 instid 1

  -------------------------------------------------------
  Me(Software Image), instance(0x1), instance size is 19
  -------------------------------------------------------
  Att1, AttSize = 0xe, AttContent: 56355230 32304331 30533131 3500
  Att2, AttSize = 0x1, AttContent: 01
  Att3, AttSize = 0x1, AttContent: 01
  Att4, AttSize = 0x1, AttContent: 01
  -------------------------------------------------------

success!

0x56355230 32304331 30533131 3500 → V5R020C10S115

Getting OMCI hardware version and vendor ID (ME 256)

WAP>omcicmd mib show meid 256 instid 0

  -------------------------------------------------------
  Me(ONT-G), instance(0x0), instance size is 73
  -------------------------------------------------------
  Att1, AttSize = 0x4, AttContent: 48575443
  Att2, AttSize = 0xe, AttContent: 32343046 2e410000 00000000 0000
  Att3, AttSize = 0x8, AttContent: 2a2a2a2a 2a2a2a2a
  Att4, AttSize = 0x1, AttContent: 00
  Att5, AttSize = 0x1, AttContent: 00
  Att6, AttSize = 0x1, AttContent: 00
  Att7, AttSize = 0x1, AttContent: 00
  Att8, AttSize = 0x1, AttContent: 00
  Att9, AttSize = 0x1, AttContent: 00
  Att10, AttSize = 0x18, AttContent: 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a
  Att11, AttSize = 0xc, AttContent: 2a2a2a2a 2a2a2a2a 2a2a2a2a
  Att12, AttSize = 0x1, AttContent: 00
  Att13, AttSize = 0x2, AttContent: 0001
  -------------------------------------------------------

success!

0x48575443 → HWTC 0x32343046 2e41 → 240F.A

Getting OMCI equipment ID (ME 257)

WAP>omcicmd mib show meid 257 instid 0

  -------------------------------------------------------
  Me(ONT2-G), instance(0x0), instance size is 44
  -------------------------------------------------------
  Att1, AttSize = 0x14, AttContent: 48473830 31304876 36000000 00000000 00000000
  Att2, AttSize = 0x1, AttContent: b0
  Att3, AttSize = 0x2, AttContent: 0240
  Att4, AttSize = 0x1, AttContent: 01
  Att5, AttSize = 0x1, AttContent: 01
  Att6, AttSize = 0x2, AttContent: 0040
  Att7, AttSize = 0x1, AttContent: 02
  Att8, AttSize = 0x1, AttContent: 01
  Att9, AttSize = 0x2, AttContent: 0020
  Att10, AttSize = 0x4, AttContent: 00000000
  Att11, AttSize = 0x2, AttContent: 007d
  Att12, AttSize = 0x1, AttContent: 00
  Att13, AttSize = 0x2, AttContent: 0018
  Att14, AttSize = 0x2, AttContent: 0001
  -------------------------------------------------------

success!

0x48473830 31304876 36 → HG8010Hv6